Caterpillar Side Cutter 112-2487/112-2488/232-2147/232-2148

Our aftermarket Caterpillar bucket side cutters/side bar guard protectors/bucket wing shrouds are bolt‑on replaceable GET wear part for Caterpillar excavator buckets and wheel loader buckets , are widely fitted on various models . Our Caterpillar bucket wear protection side cutters are mounted by bolts on both left and right sides of bucket, they act as sacrificial side protection for bucket side plate and bear side scraping, rock friction and lateral impact during digging, trenching and rock‑loading work.

Caterpillar side cutters 7Y0203/7Y0204 are commonly used on models 311D LRR 312B L 312D L 312C L 312-A 311-A 315F LCR 314D ;

Caterpillar side cutters 357-2713/357-2714 are commonly used on models 320E L 316F L 323 GX 320D2 GC 318D2 320D 323 GC ;

Caterpillar side cutters 096-4747/096-4748 are commonly used on models 320E L 316F L 320D2 GC 322B L 325-A LN 320-A;

Caterpillar side cutters 112-2487/112-2488 are commonly used on models Cat 320 and 325;

Caterpillar side cutters 8J9825/8J9826 are commonly used on models 375-A 330-A 330-A LN 336F L XE 352F 330 L 345B II 345B L 336E LH 349E L 345D L 349F ;

Caterpillar side cutters 8J9614/8J9615 are commonly used on models 330-A 322N 330-A LN 325 LN 322-A LN 330-A L 325-A LN  ;

Caterpillar side cutters 7Y0357/7Y0358 are commonly used on models 329D2 320 GX 323F L 320 L 325B 324D L 330D L 322-A 336E L 320 GC 325C 325D 336E H 325F ;

Caterpillar side cutters 357-2696/357-2697 are commonly used on models 336D2 320D L 330F 336F L XE 322B L 336E LH 329E L 325B L 329D L 325D L 320C 320D 330D ;

Caterpillar side cutters 232-2147/232-2148 are commonly used on models 320B LU 329E L 320B N 320B L 320B 320C 320B U 321B ;

Caterpillar side cutters 326-3405/326-3406 are commonly used on models 390D 336D2 390F 374F 340F 349E L 345D L 349 349F L ;

Our Caterpillar bucket side cutters have below advantages :
1. Protect bucket original side‑plate from side scraping and rock abrasion, avoid expensive side‑plate repair or replacement.
2. Sharp bevel edge reduces side‑digging resistance, raise work output for trenching and slope‑cutting tasks.
3. Bolt‑on structure supports fast part swap, cut maintenance downtime versus welded side protectors.
4. Prevent bucket side edge curling, denting and premature bucket retirement.
5. LH‑RH matched set maintains full‑side protection, reduce overall GET operating cost.
Our Caterpillar Wear parts include Half Allow/Upper Wear Plate/Top Cover/Wear Protection/Lip Shroud/Wing Shroud/Heel Shroud/Side Bar Protector/Side Cutter/Side Protector/Corner Protector/Corner Guard and so on.Welcome to contact us for more detailed information !